Card-Frame Digital Routers

Presentation Routers

CR-94M - NEW

HDMI Products
HDCP Note

DVI Products

HD-SDI Products

Others

Discontinued Products

Analog and Digital Switching UTP Transmitter

Product ID:
UWI
- wall/panel mount transmitter

The UWI transmitter allows one VGA and one HDMI/DVI digital media input to be connected up to 150 ft. from a receiver using a single, unshielded Cat6 network cable. The UWI is compatible with a host of RT Com USA receiver devices including the popular CR-94M hybrid matrix router, the UBCA and UBHD stand-alone UTP receivers, and the EDM cardframe matrix routers.

The new product is specifically designed for systems integration and fits comfortably in a standard 2-gang electrical box, but it is also self-contained and can be mounted directly in furniture or through any other surface without additional hardware. Front panel connections include an HD-15 connector, an DVI connector and a 3.5mm stereo mini plug. The rear surface hosts a captive-screw serial connection point, an RJ45 input, and a captive-screw power connector.

  • Automatically switches to the live video source
  • Allows front panel or RS-232 switching
  • Accepts both analog VGA sources and digital DVI/ HDMI sources
  • HDCP compliant
  • Wall plate or panel mount design
  • Standard 2-gang electrical box
  • Provides remote input locations for a wide are of source types. A true hybrid digital video transmitter.
    • Digital Video Bandwidth : 25~225 MHz
    • Graphic Resolution : Up to WUXGA(1,920 x 1,200)@60Hz, HDTV signal up to 1080p
    • Connector Type :VGA/DVI-D / 3.5mm Stereo / RJ-45/TX,RX,G (RS232)
    • Power Supply : DC 5V, 2.0A
    • Power Consumption : 10 Watts(Max.)
    • Operating Temperature & Humidity : 0-40*C, Less than 80% Humidity
  • UWI : 3.75x4.25x1.5(WxHxD) Inch
  • UWI – 0.45
  •  
    Copy Right © RTcom USA, Inc. 2010. All Rights Reserved